Monaco

Monaco is characteristic with its original and attractive design. Dividing the frame in a dome and a straight section increased the utility properties of the enclosure and improved its functions. The advantage of this type is its sufficient height to comfortably walk along the entire pool length, allowing a pleasant time near the pool after use, even if the weather is unfavourable.

Elegant telescopic swimming pool enclosure Klasik

The IDEALCOVER Klasik model of swimming pool enclosure is one of the most attractively priced models on the market. The arched shape of the enclosure is the most resistant against weather conditions of all offered enclosure types. It is therefore suitable for moderate climatic zone as well as mountain areas.

description-monaco

Profiles
Frame according to the customer choice considering weather conditions at the area of installation of the enclosure. Frame made of aluminum-based AlMgSi alloy. 3 or 4 carrying profiles on each module according to the customer specification. Profiles with dimensions 35×50, 40×55, 35×60 or 70x50mm according to the specification.
Side door
Specification according to the customer choice. Standard configuration: in the biggest module, possibility to use bended organic glass for angular connection.
Back wall
Specification according to the customer choice. Standard configuration: undetachable, Optional configuration: divided into sections, door according to the choice, clapper
Rails
Specification according to the customer choice. Size of the tracks according to the choice of the type of profile. Axial distance between the rails 70 or 110 mm. Choice of low track Elegance. Height of the rails-axial distance 70mm – height 15mm, axial distance 110 mm – height 25 mm. Optional configuration: rail extension for placing the enclosure outside the pool area.
Roofing material
Specification according to the customer choice. Standard configuration: roof – PK 8 or 10 mm according to the size of enclosure, sides – SAN or PK 4 mm (clear glass) with UV protection, possibility to use bended organic glass for angular connection.
Front wall
Specification according to the customer choice. Standard configuration: removable, divided, hinged door (or sliding door), Optional configuration: divided into sections, door according to the choice, clapper
Bottom edge of the front and back panel
horizontal cross members of the front and back panel, at the height of 10 cm above the terrain, the gap under the cross member prevents hitting the upper edge of the pool when the modules move on the rails along with the wall
Doors
doors in the front and back panel, lockable with catch, in open position capable of running over an obstacle without any problem

Monaco

monaco0125
Width „B“ 250 to 800 cm
Height „V“ 105 to 350 cm
Length „E“ unlimited